IFRS17 CSM Waterfall Chart Notebook

To run this notebook and get all the outputs below, Go to the Cell menu above, and then click Run All.

About this notebook

This noteook demonstrates the usage of ifrs17sim project in lifelib, by building and running a model and drawing a waterfall graph of CSM amortization on a single modelpoint.

Warning:

The primary purpose of this model is to showcase the capability of lifelib and its base system modelx, and less attention has been paid to the accuracy of the model or the compliance with the accounting standards. At very least, following items are identified as over-simplification or lack of implementation.

• The timing of cashflows is either the beginning or end of each step.

• All expenses are included in insurance cashflows.

• Loss component logic is not yet incorporated, so CSM can be negative.

• Coverage unit is set to sum assured

• Amortization of acquisition cash flows is not yet implemented.

• All insurance cashflows are considered non-market sensitive, i.e. no TVOG is considered.

• Risk adjustment is not yet modeled.

How to use Jupyter Notebook

Jupter notebook enables you to run a Python script piece by piece. You can run each piece of code (called a “cell”) by putting the cursor in the cell and pressing Shift + Enter, and get the output right below the input code of the cell.

If you want to learn more about Jupyter Notebook, this tutorial will help you. There are also plenty of other resources on the internet as Jupyter Notebook is quite popular.

The entire script

Below is the entire script of this example. The enire scipt is broken down to several parts in differenc cells, and each part is explained below. The pieces of code in cells below are executable one after another from the top.

%matplotlib notebook
import collections
import pandas as pd
from draw_charts import draw_waterfall, get_waterfalldata
import modelx as mx

model = mx.read_model("model")
proj = model.OuterProj[1]

df = get_waterfalldata(
     proj,
     items=['CSM',
            'IntAccrCSM',
            'AdjCSM_FlufCF',
            'TransServices'],
     length=15,
     reverseitems=['TransServices'])

draw_waterfall(df)

Initial set-up

The first line %matplotlib notebook, is for specifying drawing mode.

The next few lines are import statements, by which functions defined in other modules become avaialbe in this script.

ifrs17sim and draw_charts modules are in the project directory of this project. To see what fiels are in the project directory, select Open from the File menu in the tool bar above.

Building the model

The next line is to create a model from build function defined in ifrs17sim module which has just been imported.

By supplying True to load_saved parameter of the build function, the input data is read from ifrs17sim.mx, the ‘pickled’ file to save loading time. To read input from input.xlsm, call build with load_saved=False or without any parameter because False is the default value of load_saved.

If you run this code multiple time, the previous model is renamed to ifrs17sim_BAK*, and a new model is created and returned as model.

import modelx as mx
model = mx.read_model("model")

To see what space is inside model, execute model.spaces in an empty cell.

model.spaces

Calculating CSM

In model thre is a space called OuterProj and other spaces. OuterProj is parametrized by Policy ID, i.e. each of the spaces with parameters corresponds to a projection of one policy. For example, model.OuterProj[1] return the projection of policy ID 1, model.OuterProj[171] return the projection of policy ID 171.

The first line below sets proj as a shorthand for the projection of Policy ID 1. To see what cells are in proj, execute proj.cells in an empty cell.

proj.cells

You can change the sample policy to output by supplying some other ID.

proj = model.OuterProj[1]

Exporting values into DataFrame

The code below is to construct a DataFrame object for drawing the waterfall chart, from the cells that make up bars in the waterfall chart.

TransServices is passed to reverseitems parameter, to reverse the sign of its values, as we want to draw is as reduction that pushes down the CSM balance.

df = get_waterfalldata(
     proj,
     items=['CSM',
            'IntAccrCSM',
            'AdjCSM_FlufCF',
            'TransServices'],
     length=15,
     reverseitems=['TransServices'])

Tha table below show the DataFrame values.

df

	CSM	IntAccrCSM	AdjCSM_FlufCF	TransServices
t
0	8954.018303	134.310275	0.0	-1107.579599
1	7980.748979	119.711235	0.0	-1018.376245
2	7082.083968	106.231260	0.0	-936.321598
3	6251.993630	93.779904	0.0	-860.839096
4	5484.934439	82.274017	0.0	-791.417588
5	4775.790867	71.636863	0.0	-727.577888
6	4119.849842	61.797748	0.0	-668.867446
7	3512.780144	52.691702	0.0	-614.866432
8	2950.605414	44.259081	0.0	-565.186454
9	2429.678041	36.445171	0.0	-519.477000
10	1946.646212	29.199693	0.0	-477.424298
11	1498.421607	22.476324	0.0	-438.739084
12	1082.158847	16.232383	0.0	-403.151641
13	695.239589	10.428594	0.0	-370.411293
14	335.256889	5.028853	0.0	-340.285743

Draw waterfall chart

The last line is to draw the waterfall graph. The function to draw the graph was imported from the separate module draw_charts in this project directory, and was imported at the first part of this script.

draw_waterfall(df)

<matplotlib.axes._subplots.AxesSubplot at 0x20808137748>